The electromagnetic flow meter HMF 2110 series is the most common and highly accurate flow measurement device that can be universally used in various measurement fields.
Since there is no driving part like a propeller, no trouble is caused due to pressure loss, and the durability is excellent.
In addition, since the installation is simple with the flange type, even a beginner can easily install it through simple training.
Since the sensor measures the flow rate in direct contact with the fluid, a more reliable flow rate value can be obtained, and the reproducibility is also excellent.
If you are looking for a flowmeter that can be used with confidence, choose the HMF 2110 series without hesitation.
Various Types of Sensors
Key Features & Advantages
Sensor installation method
Max Minimum Flow
Measuring pipe caliber
Max working pressure
Screen display contents
Flow display unit
Flow measurement frequency
Sensor cable length
Flange mounting type (Standard: JIS, DIN, ANSI, etc.)
± 0.2% (flow rate 0.1 m/s or more)
0.05 m/s ~ 10 m/s (Flow rate by diameter)
6 mm ~ 2,000 mm
1 MPa to 4 MPa
110 ~ 220 V AC / 60 Hz
Sensor: -40 ~ 70 ℃ / Operation: -18 ~ 60 ℃
LCD Size: LCD Display 100 x 55, 3 Line, 16 Characters
Instantaneous flow rate (4 digit), accumulated flow rate (9 digit), pressure (4 digit)
Unit: m3, L, etc. / Directions: Forward & Reverse (-)
NBR, Hard Rubber, EPDM
1.875 ~ 12.5 Hz
4 ~ 20 mA, Integrated pulse active
Passive (Max 10 kHz), Relay pulse (Max Load 24 V DC / 1A)
Water, sewage, sewage, wastewater, chemicals, etc.
(Conductivity of 5 μS/cm or more)
Communication and memory
RS-232, RS-485 Modbus
128 Mbyte internal memory: date, time, instantaneous flow rate, accumulated flow rate, Pressure memory interval: 5 seconds ~ 24 hours
Sensor unit: IP 68 / Operation unit: IP 65
Alarm display when empty pipe information and self-diagnosis error occur